msxbuild/src/example/vhdl-chain/z80_bus_package.vhdl

library ieee;
use ieee.std_logic_1164.all;

package z80_bus_package is
   
    constant FINAL_Z80_BUS_DATA_WIDTH       : integer := 8;
    constant FINAL_Z80_BUS_ADDRESS_WIDTH    : integer := 16;
    
    subtype stl_logic_z80_bus_addr   is std_logic_vector(FINAL_Z80_BUS_ADDRESS_WIDTH-1 downto 0);
    subtype stl_logic_z80_bus_data   is std_logic_vector(FINAL_Z80_BUS_DATA_WIDTH-1 downto 0);

    -- tri-state: cmd + addr + data see: z80_bus_master_phy_package
    type stl_logic_z80_bus_cmd is record
        mreq_n      : std_logic;
        iorq_n      : std_logic;
        rd_n        : std_logic;
        wr_n        : std_logic;
    end record stl_logic_z80_bus_cmd;

    type stl_logic_z80_bus_cycle is record
        m1_n        : std_logic;
        rfsh_n      : std_logic;
        halt_n      : std_logic;
        busack_n    : std_logic;
    end record stl_logic_z80_bus_cycle;

    type stl_logic_z80_bus_sync is record
        wait_n	    : std_logic;
        int_n 	    : std_logic;
        nmi_n	    : std_logic;
        busreq_n    : std_logic;
        rst_n	    : std_logic;
        clk	        : std_logic;
    end record stl_logic_z80_bus_sync;

    type stl_logic_z80_ctl_sync is record
        rst 	    : std_logic;
        clk	        : std_logic;
    end record stl_logic_z80_ctl_sync;

    type stl_logic_z80_ctl_cmd  is (
        CTL_IDLE,
        CTL_MEM_READ_M1,
        CTL_MEM_READ,
        CTL_MEM_WRITE,
        CTL_IO_READ,
        CTL_IO_WRITE,
        CTL_HALT
    );

    type stl_logic_z80_bus_master is record
        cycle       : stl_logic_z80_bus_cycle;
        cmd         : stl_logic_z80_bus_cmd;
        data        : stl_logic_z80_bus_data;
        addr        : stl_logic_z80_bus_addr;
    end record stl_logic_z80_bus_master;
   
    type stl_logic_z80_bus_slave is record
        sync        : stl_logic_z80_bus_sync;
        data        : stl_logic_z80_bus_data;
    end record stl_logic_z80_bus_slave;
   
    type stl_logic_z80_ctl_master is record
        cmd_rfsh    : std_logic;
        cmd_req     : std_logic;
        cmd         : stl_logic_z80_ctl_cmd;
        data        : stl_logic_z80_bus_data;
        addr        : stl_logic_z80_bus_addr;
    end record stl_logic_z80_ctl_master;
   
    type stl_logic_z80_ctl_slave is record
        sync        : stl_logic_z80_ctl_sync;
        req_int     : std_logic;
        req_nmi     : std_logic;
        cmd_rdy     : std_logic;
        data        : stl_logic_z80_bus_data;
    end record stl_logic_z80_ctl_slave;

    type stl_logic_z80_bus_state  is (
        BUS_IDLE,

        BUS_MEM_T1,
        BUS_MEM_T2,
        BUS_MEM_TW,
        BUS_MEM_T3,

        BUS_MEM_RFSH,
        BUS_MEM_RFSH_DONE,

        BUS_IO_T1,
        BUS_IO_T2,
        BUS_IO_TWA,
        BUS_IO_TW,
        BUS_IO_T3,

        BUS_INTACK_T1,
        BUS_INTACK_T2,
        BUS_INTACK_TWA,
        BUS_INTACK_TW,
        BUS_INTACK_T3,

        BUS_REQUEST_TLW,
        BUS_REQUEST_TX,
        BUS_REQUEST_DONE,

        BUS_HALT,
        BUS_RESET,
        BUS_RESET_DONE
    );
    
end z80_bus_package;