Cleaned machine boot messages.

README.md

@@ -54,16 +54,16 @@ When you want to see whats happening do a debug run;
 		real    0m2.400s
 	
 	debug run at 11 Mhz;
-		time MB_OPENMSX_RENDERER=SDL MB_OPENMSX_THROTTLE=on make assert-all
+		time MB_OPENMSX_RENDERER=on MB_OPENMSX_THROTTLE=on make assert-all
 		real    0m49.609s
 	
 	debug run real msx speed;
-		time MB_OPENMSX_RENDERER=SDL MB_OPENMSX_THROTTLE=on MB_OPENMSX_SPEED=100 make assert-all
+		time MB_OPENMSX_RENDERER=on MB_OPENMSX_THROTTLE=on MB_OPENMSX_SPEED=100 make assert-all
 		real    2m37.379s
 		
 	debug run with video recorder;
-		time MB_OPENMSX_RENDERER=SDL MB_OPENMSX_RECORDER=on make assert-all
+		time MB_OPENMSX_RENDERER=on MB_OPENMSX_RECORDER=on make -s -j4  assert-all
-		real    0m6.556s
+		real    0m4.479s
 	
 	build parallel;
 		time make -s -j4 assert-all

lib/make/mb_autoexec.mk

@@ -1,6 +1,4 @@
 
-MB_AUTOEXEC_BYSELF            ?= on
-MB_AUTOEXEC_BYSELF_MSG        ?= Run msxbuild:
 MB_AUTOEXEC_VERSION           ?= on
 MB_AUTOEXEC_STARTUP_TIMEOUT   ?= 60
 MB_AUTOEXEC_STARTUP_EXITCODE  ?= 124
@@ -19,10 +17,8 @@ define mb_autoexec_append_rem
 	$(call mb_autoexec_append_cmd,$(1),rem $(2))
 endef
 define mb_autoexec_append_gui_mode
-	$(call mb_autoexec_append_echo,$(1),Enabling SDL renderer.)
+	$(call mb_autoexec_append_echo,$(1),Enabling boot GUI mode.)
-	$(call mb_autoexec_append_cmd,$(1),omsxctl set renderer SDL)
+	$(call mb_autoexec_append_cmd,$(1),omsxctl boot_gui_mode)
-	$(call mb_autoexec_append_echo,$(1),Enabling CPU throttling.)
-	$(call mb_autoexec_append_cmd,$(1),omsxctl set throttle on)
 endef
 define mb_autoexec_append_stop_fail
 	$(call mb_autoexec_append_echo,$(1),Disabling automatic failure.)
@@ -44,13 +40,15 @@ endef
 define mb_autoexec_write_default
 	@echo === Writing autoexec.bat for $(notdir $(1))
 	@echo -n "" > $(1)/autoexec.bat
+	$(call mb_autoexec_append_cmd,$(1),omsxctl setcolor 4 000)
+	$(call mb_autoexec_append_cmd,$(1),omsxctl setcolor 15 777)
 	$(if $(filter 40,$(2)),$(call mb_autoexec_append_cmd,$(1),mode 40),$(call mb_autoexec_append_cmd,$(1),mode 80))
 	$(if $(filter 40,$(2)),$(call mb_autoexec_append_echo,$(1),Enabled mode 40.),$(call mb_autoexec_append_echo,$(1),Enabled mode 80.))
 	$(call mb_autoexec_append_cmd,$(1),omsxctl fail_after $(MB_AUTOEXEC_STARTUP_TIMEOUT) seconds failed_exec $(MB_AUTOEXEC_STARTUP_EXITCODE))
-	$(call mb_autoexec_append_cmd,$(1),omsxctl setcolor 4 000)
-	$(call mb_autoexec_append_cmd,$(1),omsxctl setcolor 15 777)
 	$(if $(filter on,$(MB_AUTOEXEC_VERSION)),$(call mb_autoexec_append_cmd,$(1),ver))
-	$(if $(filter on,$(MB_AUTOEXEC_BYSELF)),$(call mb_autoexec_append_echo,$(1),$(MB_AUTOEXEC_BYSELF_MSG) $(notdir $(1))))
+	$(if $(filter on,$(MB_AUTOEXEC_VERSION)),$(call mb_autoexec_append_cmd,$(1),omsxctl machine_info config_name))
+	$(if $(filter on,$(MB_AUTOEXEC_VERSION)),$(call mb_autoexec_append_cmd,$(1),omsxctl openmsx_info version))
+	$(call mb_autoexec_append_echo,$(1),Run msxbuild: $(notdir $(1)))
 endef
 
 define _mb_autoexec_open_gui

lib/make/mb_openmsx.mk

@@ -1,20 +1,21 @@
 
-MB_OPENMSX_PATH_BIN     ?= bin
+MB_OPENMSX_PATH_BIN      ?= bin
-MB_OPENMSX_BOOT_TIMEOUT ?= 25
+MB_OPENMSX_BOOT_TIMEOUT  ?= 25
-MB_OPENMSX_MACHINE      ?= Philips_NMS_8250
+MB_OPENMSX_MACHINE       ?= Philips_NMS_8250
-MB_OPENMSX_SPEED        ?= $(if $(findstring turboR,$(MB_OPENMSX_MACHINE)),100,333)
+MB_OPENMSX_SPEED         ?= $(if $(findstring turboR,$(MB_OPENMSX_MACHINE)),100,333)
-MB_OPENMSX_EXTS         ?=
+MB_OPENMSX_EXTS          ?=
-MB_OPENMSX_EXTRA_SLOT   ?= -ext slotexpander
+MB_OPENMSX_EXTRA_SLOT    ?= -ext slotexpander
-MB_OPENMSX_EXTRA_MEM    ?= -ext ram4mb
+MB_OPENMSX_EXTRA_MEM     ?= -ext ram4mb
-MB_OPENMSX_EXTRA_HDD    ?= -ext ide-nextor
+MB_OPENMSX_EXTRA_HDD     ?= -ext ide-nextor
-MB_OPENMSX_HDD_SIZE     ?= 4m
+MB_OPENMSX_HDD_SIZE      ?= 4m
-MB_OPENMSX_JOYPORTA     ?=
+MB_OPENMSX_JOYPORTA      ?=
-MB_OPENMSX_JOYPORTB     ?=
+MB_OPENMSX_JOYPORTB      ?=
-MB_OPENMSX_SCALE_FACTOR ?= 3
+MB_OPENMSX_SCALE_FACTOR  ?= 3
-MB_OPENMSX_THROTTLE     ?= off
+MB_OPENMSX_THROTTLE      ?= off
-MB_OPENMSX_RENDERER     ?=
+MB_OPENMSX_RENDERER      ?= off
-MB_OPENMSX_RECORDER     ?= off
+MB_OPENMSX_RENDERER_TYPE ?= SDL
-MB_OPENMSX_CTLCACHE     ?= $(MB_CACHE)/msxbuild/omsxctl
+MB_OPENMSX_RECORDER      ?= off
+MB_OPENMSX_CTLCACHE      ?= $(MB_CACHE)/msxbuild/omsxctl
 
 define mb_openmsx_setup
 	$(if $(wildcard $(MB_OPENMSX_CTLCACHE)),,$(call mb_mkdir,$(MB_OPENMSX_CTLCACHE)))
@@ -48,6 +49,7 @@ define _mb_openmsx_run
 	SCALE_FACTOR=$(MB_OPENMSX_SCALE_FACTOR) \
 	SPEED=$(MB_OPENMSX_SPEED) \
 	RENDERER=$(MB_OPENMSX_RENDERER) \
+	RENDERER_TYPE=$(MB_OPENMSX_RENDERER_TYPE) \
 	THROTTLE=$(MB_OPENMSX_THROTTLE) \
 	RECORDER=$(if $(filter on,$(MB_OPENMSX_RECORDER)),"$(1)-omsx/output.avi") \
 	OPENMSX_USER_DATA="$(1)-omsx/share" \

lib/openmsx/share/scripts/boot_env.tcl

@@ -1,11 +1,20 @@
 # boot_env -- Sets various openMSX settings based from environment variables.
 #
 # Typically used in automation tools which run openMSX without human interaction.
+#
+# Adds the following command to openMSX;
+#
+# 'boot_gui_mode'
+# Enableds the renderer and throttle from the inside.
+#
 # Supported environment variables by this script;
 #
-# RENDERER=SDL
+# RENDERER=on|off
 # Override video output from command line.
 #
+# RENDERER_TYPE=SDL
+# Select video renderer type.
+#
 # SCALE_FACTOR=3
 # Override video scale factor for SDL renderer.
 #
@@ -25,8 +34,26 @@
 # Enables the the video recorder.
 #
 
-if {[info exists ::env(RENDERER)] && ([string trim $::env(RENDERER)] != "")} {
+# Enabled openMSX gui from inside
-	if {[catch {set renderer [string trim $::env(RENDERER)]} err_msg]} {
+proc boot_gui_mode {} {
+	global renderer
+	global throttle
+	global boot_env_renderer_type
+	if {$boot_env_renderer_type != 0} {
+		set renderer $boot_env_renderer_type
+		set throttle on
+	}
+}
+
+# Globals
+set boot_env_renderer_type 0
+
+if {[info exists ::env(RENDERER_TYPE)] && ([string trim $::env(RENDERER_TYPE)] != "")} {
+	set boot_env_renderer_type [string trim $::env(RENDERER_TYPE)]
+}
+
+if {[info exists ::env(RENDERER)] && ([string trim $::env(RENDERER)] == "on")} {
+	if {[catch {set renderer $boot_env_renderer_type} err_msg]} {
 		puts stderr "error: env.RENDERER value $err_msg"
 		exit 1
 	}